Atn 2000 Software

Preparing the Device (.PDF, 4.91 Mb) Unpacking The following steps must be performed before using the device: • Open packaging box, remove ThOR 4 and check the contents. • Eyecup • Standard rings (2 pcs.) • L-shape ring • Scope Cover • USB-C cable • Manual • QSG • Cloth • Make sure that nothing is missing. • Inspect the device for damage to optical surfaces, body, eyecups, operation buttons, etc. • Ensure that all optical surfaces are clean and ready for use. NOTE: If any accessories are missing or broken contact ATN’s Customer Service at 1.800.910.2862. Charging the device The device is equipped with a USB (type C) port. You will find it under the rubber cap on the right side of the device (caps are marked with appropriate icon).

We have included a USB (type C) charging cable with your scope. Plug the cable into a USB wall charger that has an output of 2 amps (Wall Charger not included). Charge your scope for 6 hrs using a 2A USB wall charger.

Note using a wall charger with lower amperage will take longer to charge your scope. • Recommended charger is 2A USB charger.

Download ebook kimia dasar raymond chang terjemahan jilid 1 pdf online. Buku-buku kimia dasar ini bagus juga untuk siswa sma yang sedang mempersiapkan diri ikut dalam olimpiade sains kimia.

• Battery charging time (from 0 to 100%) is 6 hours with 2A USB charger. • Battery run time is 16 hours on a single charge. Micro SD and USB C Ports The device is equipped with a microSD Card and USB (type C) ports. You can find them under the rubber caps on the right side of the device (we marked the caps with appropriate icons). To open the rubber port cover, gently lift the rubber cover and move it out of the way. NOTE: Make sure that the device is turned off before inserting the formatted micorSD Card into its assigned port.

ATN Network is the biggest and most reliable Arabic IPTV provider in the world. Our channels are delivered to you via the internet. ATN Network is the biggest and most reliable IPTV provider in the Arabic world. Pull back the curtain of the night with high quality night vision and thermal imaging devices from ATN.Many law enforcement and military units make ATN (American Technologies Network) their provider for optical products built to exacting specifications.

• Always format a new microSD card before using. • Insert microSD card as shown. • Use a thin object (small coin, paper clip) to lock the microSD card in place after inserting it into the slot. • Return the cover to its original position. NOTE: There is only one correct direction to insert the microSD Card. Do not force the microSD Card into the port doing so may cause damage to both the scope and the card itself.

To remove the microSD Card from the port, push the card slightly in using the same thin object you did before. When the card pops up a few millimeters, pull the card out with your fingers or tweezers. NOTE: If you are going to record video, the microSD Card should be a Class 10 (10 Mb/sec) or faster and have capacity from 4 to 64 Gb. Firmware Update Before operating your device, update the firmware to the latest version. All firmware updates can be found on at. To receive a notification concerning new firmware updates, please register your device on our website.

An email notification will be sent when a new firmware update becomes available. To update the firmware you will need a microSD Card and fully charged internal battery. NOTE: In the event of a power failure during an update, the device may crash. This will corrupt the system files and the device will need to be sent back to the ATN factory for service. To ensure your zero coordinates are not lost, write down your zero coordinates before continuing to update the firmware! Update the new firmware as follows: • Download the ***.bin file and copy to your microSD Card — root directory. • Insert the card into the scope.

• Turn ON the scope. • In the “Firmware Update” dialog box select “Yes” to start the update. • When the update counter reaches “100%” the device will automatically restart. • Once the device is powered up it will enter self configuration mode.

Game kerajaan hack 320 240. • After completing it will automatically restart. • Motion Sensing platform will be configured when first turned on. • Once the Firmware update completes, please do a factory reset before using the product. • Please delete the Firmware file off of the microSD card after the process is complete. Or the system will try to update the Firmware every time you turn the scope on.